Average Reviews:
(More customer reviews)Note - see edit at end for added comments.
I bought this detector recently and just completed a 600 mile round trip to Florida. The detector performed very well, and I'm really satisfied with both the performance and value.
K-Band Performance. Very Good - On one stretch of flat road the XTR-695 alarm went off approx. 1.3 miles in advance (with traffic in front of me). Even on rolling terrain with a patrol car located at the bottom of the dip in the road, it alerted approx. a 1/2 mile away, plenty of time to slow down. Very solid performance on K-Band.
KA-Band Performance. Very Good to Excellent - It picked up an oncoming patrol car approx. a mile away with the patrolman toggling the radar on and off as he encountered traffic. Another time a patrol car was parked at the end of very long sweeping curve on an interstate, shooting across the road at about a 45 degree angle. A very difficult test, but the 695 gave about a 15 second advance warning, which was more than enough time to slow down.
Navigating The Menu - Yes, even radar detectors now have menu options, but this one is very simple to navigate. Just press the Menu button, then keep pressing it until the option you're seeking appears on the screen. You can turn off, or on, just about every feature the detector has.
X-Band - I turned this off in the menu. It's used very little in 48 states (New Jersey & Ohio being the exceptions) and turning it off cut the number of false alarms way down (all those X-band automatic door openers in strip malls are now ignored).
POP Detection - Detecting radar guns in POP mode (the few radar guns that have a POP mode that is) requires a detector to spend a lot of time searching for the very weak POP signals, usually lessening response time and increasing false alerts. I turned POP mode off. POP readings can't be used in court, they just let the police get a peek at vehicle's speed without sending out a stronger signal. I figure you'll get hit a couple of seconds later with the real radar blast if you're speeding, probably too quickly to slow down anyway, so POP detection didn't seem worth it. I had gotten a few false KA band alerts, apparently bleed over coming from other detectors, and turning off POP seems to have prevented those types of false alerts almost entirely.
Voice Alert - Great feature. This is one of those things that turns out to be much more useful than you would think. You hear a quick beep/buzz to get your attention, and then a very loud clear voice announces the particular threat (i.e. "K Band"!). You know exactly what you're dealing with without ever having to look at the detector.
Periscope LED Alert - Another feature that turns out to be of more use than anticipated (the "periscope" terminology is Whistler's btw). Two bright blue LEDs, that are raised above the top surface of the detector, flash whenever radar is detected. Even with the music cranked, the LEDs should attract your attention.
Audio Alert - The different radar bands (and laser) have their own distinct alert (buzz/beep, whatever you want to call them). According to various detector experts, the speaker in the XTR695 is one of the largest in the business. All I know is that it's capable of being very loud, depending on how you set the volume control.
Display - This is the one area I'd say Whistler has room for improvement. The main display is dim, but it's not unreadable, at least not in my vehicle. Whether or not this is going to be a major issue probably depends on the individual and the particular vehicle (or the ambient lighting in that vehicle). For me, with the voice alerts telling me which band the radar is on (or announcing a laser hit), the loud audio alerts and the flashing blue 'periscope' LEDs, the display just isn't that important.
A note on detection distances mentioned above. I run the XTR695 in Highway Mode. I do not use any additional filter modes (Filter1 or Filter2). The 695 uses a basic filter mode from the factory, and that is the only filtering that was being done. The encounters were all with traffic in front of me, which makes a big difference in the real world. If you have the bucks, some of the more expensive detectors will pick up radar farther away than the 695, but some will not. Do your research before investing a lot of money in a detector. While this detector doesn't qualify as the very best out there, it has done very well in most of the tests I've come across.
In summary, a very good detector, and well worth the money.
Edit 12/18/08: I still like this detector very much. I wanted to add however, that the main reason I chose the XTR695 over the Whistler Pro 78 was due to the RSID feature available with the XTR695. After living with RSID for awhile, it hasn't proven as useful as I thought it would (it's not a scam by any means, and works perfectly well). If you want the top-of-the-line from Whistler, by all means get the XTR695. However, if price is a concern, then the Whistler 78 should provide similar performance at a lesser price (and with the nice blue LED display to boot). Again, I'm very satisfied with the XTR695, but wanted to pass on my experience in case anyone is trying to decide between the 695 vs the 78.
Click Here to see more reviews about: Whistler XTR-695 Radar/Laser Detector with Real Voice Alerts and External Audio Jack
Whistler's XTR-695 is a detector that maximizes sensitivity and minimizes falsing. Ka Max Mode gives you improved Ka Band sensitivity. Radar Signature ID displays known Ka gun frequencies to help distinguish threats, and Laser Signature ID does the same by displaying pulses per second of received laser signals. Take advantage of 360-degree coverage for all radar and laser bands, Whistler's patented POP-mode detection, and a wealth of bonus features like a 72-point digital compass and vehicle battery voltmeter.
7 Color Backlit LCD Text Display The XTR-695's brilliant text display provides distinct visual confirmation of signals detected, signal strength, and indicates engaged modes of operation. You can choose from 7 different display colors for a bit of personalization, even assigning a different color for each band, or scrolling colors.
Filter Mode There are times when a radar detector can emit the same frequency as police radar and can cause your detector to falsely alarm. Sometimes a detector can display a signal when picking up another radar detector in vehicle close by. The Whistler Filter Mode checks the signal to verify if it's a legitimate police radar or a false alert from another detector.
Auto Dim Mode The Auto Dim feature automatically switches the illumination of the text display between the bright and dim settings according to varying light conditions so that the text display will always be easy to read.
INTELLICORD Ready Add the Whistler INTELLICORD and you'll be able to remotely control the radar detector in settings such as power on/off, city modes, dim/dark and quiet/auto quiet with a simple press of a button.
Real Voice Alerts Real Voice provides added information to the detected signal over and above the simple band ID tones. The unit says "X band" when it detects an X band signal. This allows you to keep your eyes on-the-road. Real Voice is also used to articulate Safety Warning System messages and feature selections. Real Voice will be used to articulate the following:
Band Identification
Safety Warning System messages
Feature Selection
Low Profile Alert Periscopes Whistler's Low Profile Alert Periscopes provide an added attention getting visual alert. The two extra LEDs flash on and off when the unit alarms to provide a unique visual alert.
3 City Modes/Highway Mode Highway mode provides full audio and visual warning of laser/radar systems while maintaining full sensitivity. Highway mode is the default setting of all Whistler's laser/radar detectors. City mode helps reduce the annoyance of automatic door openers and burglar alarm alerts by providing an initial alert (same distance as Highway Mode) then remaining quiet unless the signal strength becomes very strong. When the signal increases the unit will alert briefly to notify you of the change in signal strength.
Stay Alert The Stay Alert feature is designed to test a driver's alertness. Within 30 to 60 seconds after the feature is engaged an alert is sounded; to show alertness, the driver must press the volume, city or the mute button within 3-5 seconds. If a button is pressed within 3-5 seconds, the cycle is repeated. If a button was not pressed within 3-5 seconds the unit alarms at full volume and the display shows an unique visual alert.
Quiet/Auto Quiet Modes Pressing QUIET before a signal is detected engages Auto Quiet Mode, which automatically reduces the audio level after the initial warning to a low audio level setting. Pressing QUIET during a radar/laser encounter silences audio alerts, while allowing visual alerts to keep you informed.
Alert Priority When two or more signals are received at the same time, the alert priority is: Laser, VG-2, Speed Radar, Safety Radar.
Example: If X band is alerting, then suddenly a VG-2 signal is detected, the VG-2 warning will override the X band alert.
Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 3 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 6 hours have expired. The detector will alert you with an audible and visual warning before it shuts off.
Safety Warning System--SWS This relatively new radar is not for speed detection at all, it is used to keep you informed of highway safety. Transmitters are installed and programmed (for example: in emergency vehicles) to make you aware of possible situations that may require your attention, such as: ambulance vehicles that are moving or stationary, road hazards ahead, road construction delays or detours, etc.
What's in the Box Whistler XTR-695, Power Cord, Windshield Mount, User's Manual
Get 71% OFF
No comments:
Post a Comment