Showing posts with label usb. Show all posts
Showing posts with label usb. Show all posts

11/15/2012

USB 2.0 Cable, Type A to B - 6 FT Black Review

USB 2.0 Cable, Type A to B - 6 FT Black
Average Reviews:

(More customer reviews)
There's no problem with product.Have nothing to complain.But i want to recommend the seller cuz they replied my immediately after I wrote to them asking something about the product.Their shipping is fast too.Thank you for your service.

Click Here to see more reviews about: USB 2.0 Cable, Type A to B - 6 FT Black



Buy Now

Click here for more information about USB 2.0 Cable, Type A to B - 6 FT Black

Read More...

11/13/2012

High-Speed USB 4-Port Hub with Splitter Cable Review

High-Speed USB 4-Port Hub with Splitter Cable
Average Reviews:

(More customer reviews)
At first I thought there was problem with the outside tentacles, but it turns out you just have to move things around if you're using items that draw power Vs transferring data. It slows things down ever so slightly---not enough for me to worry about.

Click Here to see more reviews about: High-Speed USB 4-Port Hub with Splitter Cable



Buy Now

Click here for more information about High-Speed USB 4-Port Hub with Splitter Cable

Read More...

11/08/2012

Usb 2.0 Two To One Sharing Switch W/2X Usb Cables Review

Usb 2.0 Two To One Sharing Switch W/2X Usb Cables
Average Reviews:

(More customer reviews)
GREAT!This switch works perfect for me to switch my external hard drive back and forth from my PC To my media player.It has two output lights,a green and red one to let you know which output you are connected to.

Click Here to see more reviews about: Usb 2.0 Two To One Sharing Switch W/2X Usb Cables



Buy Now

Click here for more information about Usb 2.0 Two To One Sharing Switch W/2X Usb Cables

Read More...

11/07/2012

Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC Review

Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC
Average Reviews:

(More customer reviews)
I only gave it 1 Star, because that's the lowest rating allowed.
Pros: It's a good night light.
Cons: Everything else you would want in a hub - 1) EVERYTHING I plug into it, my Laptop tells me the device would work faster if I bypassed the hub - and it really does slow down my transfers: transferring large files that would take 3 minutes, now take upwards of 20 minutes thru the hub. 2) My mouse would be erratic. 3) With the unit connected to my Laptop, 90% of the time my Laptop would not reboot - had to remove the battery and re-install it for it to reboot. 4) 20-25% of the time, my Laptop would not recognize my external harddrive(s) nor my DVD burner.
Has a good nitelite tho.

Click Here to see more reviews about: Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC



Buy Now

Click here for more information about Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC

Read More...

11/04/2012

Logitech io Personal Digital Pen Review

Logitech io Personal Digital Pen
Average Reviews:

(More customer reviews)
...The box ships with version 1.1 software, but Logitech released version 2 in early September 2003. Learned that via researching the product a few weeks ago. The newer software (d/l from Logitech) bundles an integrated (fully featured 30-day trial version) of a (MyScripts-based) handwriting recognition engine. That's for the entire page, folks, not just the little blocks at the bottom, as was the case previously. It ain't perfect, but neither is my chicken scratch. The box includes a 20% off coupon if you register at Logitech. Apply that to purchasing Logitech's version of MyScripts, ...
Most importantly, you can take your notes, drop the pen in its well-like cradle, and configure the "Desktop manager" to take one of several automated actions. I chose to convert the pen notes to text, and save as RTF. ... But you could save as a standard MS Word .doc file instead if desired. Now, whenever I want to locate particular notes, I just click open InfoRapid and run an incredibly speedy search thru the rtf files I've compiled, courtesy of the IO package. E-Heaven y'all !!
A quick word about the pen. Yes, it's larger than usual, but the grip area is comparable to a highlighter. It's also textured and curved, making for a delightfully comfortable writing experience (even for this woman with very small hands). On the down side, I wouldn't place it in a shirt pocket, for the same reason I've learned not to place loose change there. The pen can be clipped to the pocket for stability purposes, but the size of the bottom portion overwhelms the smaller top part, tending to unexpectedly detach itself. Undiscovered, that's a recipe for battery drain. There's only one other "grrr", but it too is of minor concern: there's a "keyword" deal with the software-- I suspect it's a hold-over from the initial version. Complete pain in the skleeboop, as you have to add the keyword to a list first, rather than on the fly. Thankfully, we can avoid the whole hassle, now that the full-page recognition/conversion capability is available, obviating the need for discreet searchable keywords.
That brings me to the issue of revisions, after the recognition process kicks in. I can't imagine an easier process. Your handwritten notes appear in one pane, post download. A nicely sized popup box shows the plain text translation. Thus, a quick comparative glance tells you whether you really "need" to correct anything. Personally, I purchased the pen with the goal of searchable notes, not letter- or brief-writing. Hence, as picky as I am (attorney- so I truly require precision in most instances), I rarely "need" to make revisions, since the accuracy is good enough to permit the searchability I've long craved. If there's a question later, I have the luxury of a backup via the handwritten notebook-- with no extra strain whatsoever. (Huge sigh of contentment!)
You can view very precise discussions at the Logitech IO Pen users' forum: I found it especially enlightening to learn there that many user comments were taken to heart by Logitech, as most have been incorporated into the upgraded software. One cautionary note though-- on my XP/SP1 machine, I couldn't get the version 2 software to install. My stupidity, as the materials tell you that version 1.1 of the .Net Framework is required. I failed to focus on the fact that my long ago installed version was merely 1.0. Duh! A quick scurry to the MS site to download v 1.1, and I was set. Once that requisite was satisfied, I elected to install the CD version, and immediately thereafter, the newer version 2 downloaded package. Smooth as silk during installation, and every day thereafter. (I've been a notetaking little demon for the past 10 or so days straight, so if there were glitches, trust me, I'd have bumped into them by now.)
You'll likely fall in love with this beauty. But, since a writing utensil is such an intensely personal choice, an Amazon.com purchase would be wise.......
In the box:
-- pen
-- 5 pen refills **
-- 50 or so sheets/notebook (regular = 80 pages/160 sheets)
-- little post-it note pad
-- well-shaped cradle, with physically attached USB cord
-- power adapter (read: brick) ( probably can leave it at home for 4-5 day trips though)
-- munchkin how-to booklet -- READ IT :-) for install specifics before you touch anything, to avoid snafus
-- 20% off coupon
You'll wanna grab the new software while awaiting your package:
...Digital pen & paper >> IO Digital pen (NOT MyScripts)
** The refills: you'll notice that the clip segment of the pen (silver) has a small hole. You situate the current ballpoint into that hole, then twist to remove it. Nice touch.
The software is for Windows XP, Windows ME, Windows 2000, Windows 98.

Click Here to see more reviews about: Logitech io Personal Digital Pen

Using MyScript Notes software, the io Personal Digital Pen transforms handwritten notes into computer readable files, including text, tables, and drawings. It recognizes natural handwriting, numerous geometrical forms, arrow and tables. With the Logitech IO personal digital pen, your handwriting becomes an effective tool for the digital world--without changing the way you work. Write or draw on special digital paper and your words and images are both inked on the paper and stored in the pen's memory. To transfer these handwritten documents to your PC, place the pen in its cradle and download them. Then, easily share, store, organize, and retrieve them.
The Logitech IO digital pen remembers everything you write when you are away from your PC. In addition to a regular ink cartridge, it includes an optical sensor that captures your words and drawings. A built-in processor digitizes your handwriting, storing up to 40 pages in memory between downloads. Based on functionality from Anoto, the Logitech IO digital pen encodes on the basis of microscopic dots printed on the paper. Since it always knows exactly where you are, you can even accurately edit the original page at a later time. Use Post-it Notes and Cambridge Limited notebooks enabled with the Anoto functionality to capture your thoughts.
Protect your information with electronic copies, so you'll never forget or lose handwritten documents again. Find the information quickly with your PC's indexing and searching functions. Even have your handwritten notes available on the road. Simplify your organization by writing calendar entries into your electronic organizer and adding handwritten tasks to your electronic to-do list.
Improve communication by circulating hand-drawn sketches and drawings and meeting or class notes without photocopying. Write e-mail when you're away from your computer for automatic sending on download. The Logitech IO digital pen comes with a rapid-charging USB cradle, an AC adapter, helpful software, five ink refills, one Mead Cambridge Limited Notebook, one 3M Post-it Notes Pad, and a two-year limited warranty.
How it works The Logitech io digital pen looks and feels just like an ordinary ballpoint pen and you use it in the same way. There are no keys to press and no display. You activate the pen simply by removing the cap and deactivate it by replacing the cap. Then you write on digital paper the same way you write on regular paper. The main parts of the digital pen are a digital camera, an advanced image-processing unit, and a communication unit. It also contains an ink cartridge so that you can always see what you have written or drawn.



Buy Now

Click here for more information about Logitech io Personal Digital Pen

Read More...

11/03/2012

USB 2.0 Switch 4-2 USB Sharing Device Between 4 Pc Review

USB 2.0 Switch 4-2 USB Sharing Device Between 4 Pc
Average Reviews:

(More customer reviews)
I was looking on Amazon for a USB switch to share a scanner (Epson Perfection V500 Photo) and printer (HP Photosmart 7960w) between two computers. Both computers were just recently built with Windows 7. Sure you can share the printer from one, but another solution is needed for the scanner. At first I was thinking of finding some 3rd party software for sharing the scanner from one computer, but way too expensive for its purpose and browser software to replace the scanner's software did not seem appealing. After searching the web, I came across the solution of using a USB switch. Problem solved. I was originally going to purchase the Cables-2-Go switch, which is only a 2-to-1 switch. To share the printer, I would also have to buy a USB hub and this would had to the cost. I was at Fry's looking at hubs and found this switch. It was only $34.99, which would be cheaper than buying a 2-to-1 switch and a hub. It also has a Windows 7 Ready sticker on it, which sold me on buying it.
Installation was fairly easy, but I did run into a problem with having my USB cables to long. This can be a problem with all USB switches. Basically I had the original 6' cables from the devices to the switch and 10' cables going to the PCs. Unfortunately for the first PC I plugged a 10' cable for the PC into the monitor's USB hub, which is basically another 6' cable to the PC. This dropped the USB switch's port to a 1.1 data rate. I used one of the 3' USB cables supplied with the switch and connected it straight to the PC and the switch was running again at 2.0. The second PC had no problems using a 10' USB cable from the switch to the PC.
I'm not into manually hitting the switch, so I installed the software. You can either use a hotkey or the round icon in the system tray, which my wife likes using. I was debating on giving this only 4 stars because I did run into a glitch yesterday. When I awoke both PCs from sleep, I could not switch the device from the first PC to the second PC. From the second PC the SWITCH text was grayed out when right clicking the icon and the hotkey did not work. Today when I came home from work the switch was fine and I was able to switch from one computer to another. I called technical support about this and nobody else has complained about this problem. So in the end I am just saying this is a one time glitch and only with her system. I also found out that the SWITCH text should never be grayed out. Since this is a one time instance so far, I decided to not remove a star and gave it five. The only other tid bit of information I can give and this is in their manual is that when switching I always have to click Yes for Enforce Switch. This is because the printer is always sending out signals, so the switch thinks the device is busy and the icon will always be red on the machine that is not using the switch. You will also have the red icon/device busy indicator when using external hard drives. Just make sure your device is not actually doing something before switching.
If you only need to share two USB devices and running Windows 7 on the PCs then this is the solution for you. This will take care of two USB devices and you can share them between four PCs. I have to admit that it is pretty nice that I don't have to be asked to scan some pictures for my wife now and with printing she can use her own resources and not mine. :D

Click Here to see more reviews about: USB 2.0 Switch 4-2 USB Sharing Device Between 4 Pc



Buy NowGet 16% OFF

Click here for more information about USB 2.0 Switch 4-2 USB Sharing Device Between 4 Pc

Read More...

11/01/2012

Mini Bluetooth 2.0 USB dongle Review

Mini Bluetooth 2.0 USB dongle
Average Reviews:

(More customer reviews)
Purchased this Bluetooth adapter because the one included with my Microsoft Wireless Notebook Presenter Mouse 8000 is rather large. "Setup" and installation of the BlueSoleil software was painless and the adapter seems to be working great with the exception of lag that sometimes occurs with my mouse movements. The mouse did not do this with the Microsoft adapter so I believe it is either the adapter or BlueSoleil software that is causing this. Still a great device and I held one star due to the occasional lag.

Click Here to see more reviews about: Mini Bluetooth 2.0 USB dongle



Buy Now

Click here for more information about Mini Bluetooth 2.0 USB dongle

Read More...

10/27/2012

Cables Unlimited USB-1375 60M USB Over Cat5e Extender with Power Supply 1 Pack (Black) Review

Cables Unlimited USB-1375 60M USB Over Cat5e Extender with Power Supply 1 Pack (Black)
Average Reviews:

(More customer reviews)
When we remodeled our bedroom we moved our TiVo into the closet. Running the HDMI cable to the TV from the TiVo was easy - figuring out how to get the remote was a little harder. We have aTiVoSlide remote control which works via Bluetooth: a Bluetooth receiver connects to the TiVo via USB cable. I needed to be able to get the receiver out of the closet and into the main bedroom, ideally behind the television. The maximum length of a USB cable is 10-15 feet, depending on the device, which was too short to reach from the TiVo to the television.
The first solution I tried was a Tripp Lite repeater cable, which is unpowered. The Bluetooth receiver appeared to work just fine with it: a blue light on it illuminated and the light blinked in response to button presses on the remote, just as it should. The commands, however, were not received by the TiVo. The repeater cable was able to boost the signal enough to reach from the TiVo to the receiver, but the receiver didn't have enough strength to send the commands back to the TiVo through the cable.
While I looked for another solution I connected the receiver to a 6' long USB extension cable, just to get the receiver out of the closet so it could receive commands from the remote. This worked but not very well. The commands were received by the TiVo but there was a delay so the response was very laggy. In addition, not all the commands were received by the TiVo which made it very hard to control the DVR.
Clearly a powered solution was required. Though this product didn't have any reviews when I ordered it I didn't have many options. I've used Cables Unlimited cables before so at least I was familiar with the brand.
Amazon's product page is a little light on information for this product and there are a couple of critical pieces of information which should be on the page. The product page at the Cables Unlimited site has more information. First, this extender is only USB 1.1 compliant, not USB 2.0 compliant. Second, only one device can be connected to this extender so putting a hub at the end of it won't work (according to Cables Unlimited, at least).
This extender couldn't be any easier to set up, which is good because the instructions consist of a single diagram. There are 3 pieces to this product: the sending and receiving units and a power supply. The sending unit is a small box labeled "local". It has a USB connection that plugs into your computer (or TiVo in my case) and a port for an Ethernet cable, so it has a male USB and a female Ethernet connection. The receiving unit is labeled "remote" and has a port to plug the remote USB device into (in my case the TiVo Bluetooth receiver) and an Ethernet port, so it has a female USB and a female Ethernet connection. The power supply plugs into the remote end as well.
I plugged the "local" box into the TiVo and connected a 35' Ethernet cable to it. Into the remote end I plugged the other end of the Ethernet cable, the power supply, and the Bluetooth receiver. That was it. The receiver came to life, the TiVo recognized it, and everything just worked. Not only did the remote work, it worked great. There was no lag, no dropped commands. It was as if the Bluetooth receiver was connected directly to the TiVo. I've got no complaints about how well this extender works or how easy it is to install.
My only complaint is the power supply. It doesn't plug all the way into the "remote" box - about 1/4" of the plug is left exposed. Where I have the "remote" box set up this isn't a problem but it could be an issue depending on where it's set up. The USB cable doesn't fit all the way into the "remote" box either. Thatt's just sloppy design so I docked the product a star. I've uploaded a picture to show the gaps.
Overall, though, this extender works great. Powering the remote box really made the difference. As responsive as the TiVo remote is I think this extender could be used for mouse, keyboard, or even a gaming controller, as long as they only need a USB 1.1 connection.

Click Here to see more reviews about: Cables Unlimited USB-1375 60M USB Over Cat5e Extender with Power Supply 1 Pack (Black)



Buy NowGet 31% OFF

Click here for more information about Cables Unlimited USB-1375 60M USB Over Cat5e Extender with Power Supply 1 Pack (Black)

Read More...

10/19/2012

UNOTRON SpillSeal SAC2 - SMART card reader - USB - black Review

UNOTRON SpillSeal SAC2 - SMART card reader - USB - black
Average Reviews:

(More customer reviews)
I am sure this is a no-frills durable product, but not having a windows 7 driver I can't get it to install in the first place. I find it unacceptable, being a month out, with several months in beta/RC this product should have a driver. It is not as big a leap from xp->vista as vista->7 so I am dissapointed with Unotron.


Click Here to see more reviews about: UNOTRON SpillSeal SAC2 - SMART card reader - USB - black



Buy Now

Click here for more information about UNOTRON SpillSeal SAC2 - SMART card reader - USB - black

Read More...

10/02/2012

SCM SCR331 - SMART card reader - USB Review

SCM SCR331 - SMART card reader - USB
Average Reviews:

(More customer reviews)
Excellent product. Just make sure you download a good description of how to install. Also, in order to update the firmware for it, you need a Windows computer, so Mac buyers should make sure they have access to a Windows computer prior to ordering this. Still, once set up, it works well.

Click Here to see more reviews about: SCM SCR331 - SMART card reader - USB



Buy Now

Click here for more information about SCM SCR331 - SMART card reader - USB

Read More...

9/30/2012

Keyspan US-4A 4-Port USB Server (12 Mbps) Review

Keyspan US-4A 4-Port USB Server (12 Mbps)
Average Reviews:

(More customer reviews)
I opened the packing box 10 MINUTES AGO, and both of my printers are up and running on every PC.
I was a little worried when I saw the 'documentation' was smaller than a CD, but everything went off without a hitch:
Step 1: Power up the USB server with no USB device hooked up to it, and connect it to the network via RJ45.
Step 2: Install the software (if WinXP, use the unsigned drivers). Your OS searches the network at this time and finds the USB Server.
Step 3: Hook up your USB devices.
THAT'S IT!!!
If you have a Multi-Function printer, you NEED this device, because even if you find a compatible print server, it will only let you use the print function. A Printer Server turns your Multi-Function printer into a Uni-Function Printer.
With this device, it will be just as if the printer were directly connected to your PC. In fact, you are not limited to PCs; you can connect ANY USB device to it (camcorder, scanner, webcam, even a mouse or keyboard).
The ONLY advantage that a print server has over this device is that with a server, multiple PCs can control a target device at once (really, that's not quite true, since the requestes are put in a queue).
With the USB server, every PC uses a little administration program. When launched, it opens a window that lists all of the devices that are connected to the USB server. A PC on the network that wants to use a device (i.e. print) needs to first take command of that device. You just select the device by name, and hit the connect button. From that point on, it's as if the printer were plugged directly into your PC. Others trying to use the printer would see that you were subscribed to it; they would have to wait until you release the subscription - which you have to do manually.
They could really use a virtual queue that keeps checking until the subscription is open, then releases the subscription when the job is completed. The problem is that if the device isn't a printer, how does it know when the job is finished?
So, even if you have only one PC on the network, you need to request access to use the printer. On the (sort of) bright side, every time you power up the PC, it will remember who owns what. I think the memory is maintained in the USB Server itself, not the PC. So if a PC takes control of a device, then dies, cycling power on the server releases all devices.
This is a little hokey (they claim they MIGHT fix it in a later release) but it's 1000% better than losing printer functions you paid for. They have an 'Admin' panel on the software, but I don't think it currently lets you boot someone off of a device.
If you already installed the devices you want to share, then once you connect to the server, every device will show up by name. When you take control of one or more of the devices, Windows goes through the 'new device ready' popup.
If you haven't added the device to your PC, then the server will show a default name for the device. Once you take control of it, Windows will detect the PnP device, and start the 'add new hardware' wizard.
It's truly as if the USB server didn't exist, and you had a REALLY long USB cable.
I have a Canon i950 Photo Printer, and a Brother 9600 MFC.
The Brother is particularly painful in that it won't even work with most printer servers. In fact, Windows XP doesn't even have a dedicated driver for it; Brother has all but stopped supporting it.
I was highly skeptical, but the MFC's scanner worked right away. As for the Canon, I launched the Status Monitor, and was soon seeing I had to replace an ink cartridge. So, the USB server is bi-directional, too (most Print servers aren't).
It took me longer to write this review than it took me to get the server up and running.
I can't recommend this product highly enough!

Click Here to see more reviews about: Keyspan US-4A 4-Port USB Server (12 Mbps)

Access USB devices from a WiFi notebookSeparate the USB device and the host PC by any distance

Buy Now

Click here for more information about Keyspan US-4A 4-Port USB Server (12 Mbps)

Read More...

9/18/2012

TCRD4CA1H0N3 Finger Print Reader Review

TCRD4CA1H0N3 Finger Print Reader
Average Reviews:

(More customer reviews)
I bought this finger print reader thinking it was the "to go" model because of the picture, which is a picture of the to go model, but when it came it was the one with a cord, not what I wanted.
I tried to contact the seller Eikon(what the guy at Amazon suggested) but no reply.
So I sent it back.

Click Here to see more reviews about: TCRD4CA1H0N3 Finger Print Reader



Buy NowGet 13% OFF

Click here for more information about TCRD4CA1H0N3 Finger Print Reader

Read More...

9/04/2012

USB To Parallel Cable Review

USB To Parallel Cable
Average Reviews:

(More customer reviews)
This cable enables you to connect an older, parallel printer to a USB port on your computer at nearly half the price of other cables in this category. If you have a parallel printer, a spare USB port and use Windows XP or 2000, you need this cable. Why? Windows XP and 2000 do not allocate a processor interrupt (IRQ) for the parallel port. This means that Windows must do this on demand and allocate more memory and processing power to the task of printing, which can bring your computer to a screeching halt at least for a few seconds. It will not be like having a new computer, but this small investment may save you time and frustration when you print.

Click Here to see more reviews about: USB To Parallel Cable



Buy NowGet 33% OFF

Click here for more information about USB To Parallel Cable

Read More...

8/26/2012

Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC Review

Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC
Average Reviews:

(More customer reviews)
Thought this USB hub was good. Soon after using it for about an hour, the ports started going bad. Not working. Change to another port. It would either not work or quit very quickly. Wasn't worth hassle of sending it back. Would not purchase again. Not this one.

Click Here to see more reviews about: Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC



Buy NowGet 78% OFF

Click here for more information about Hi-Speed 7 Port USB 2.0 Hub +Power AC Adapter for PC

Read More...

8/16/2012

HP LaserJet 3015 All-in-One Review

HP LaserJet 3015 All-in-One
Average Reviews:

(More customer reviews)
I bought this because I already have an HP laser printer which is far and away the best printer I have ever owned. I am sure this all-in-one is a solid HP product. But I am writing this review to alert buyers that this is an "all-in-one-minus-one. I hope to prevent a mistake similar to mine.
The "no flatbed scanner" in a couple of reviews did not sink in as I was shopping late at night, so I ordered the machine.
When the machine arrived, the light dawned: YOU CAN ONLY COPY USING THE AUTOMATIC SHEET FEEDER. There is NO WAY to copy a page from a book or any non-normal paper source. Thanks to Amazon for their reasonable return policy, but I'm out the cost of 2-way shipping for my dumb mistake. Hopefully this will alert those looking for a more versatile copier of this regrettable limitation.

Click Here to see more reviews about: HP LaserJet 3015 All-in-One

Equally at home in Windows and Mac operating environments, the HP LaserJet 3015 All-in-One printer provides fast printing, copying, faxing, and color scanning. Plus, it offers a compact design that boasts versatile media handling, a simple and intuitive user interface, easy configuration and monitoring, and a generous 7,000-page monthly duty rating for busy offices.
Printing features include first page out in just 15 seconds, and up to 15 ppm printing at 1,200 dpi effective resolution from a 600 dpi engine. Copying is achieved at the same speed and resolution as printing, producing up to 99 copies at one time, with options for reduction and enlargement from 25 to 400%.
A built-in V.34 fax modem provides easy workgroup faxing, with 120 programmable speed dial locations, up to 110 pages of memory (2 MB), and a whole host of advanced controls. The 3015 also functions as a sheet-fed color scanner, achieving up to 9,600 dpi enhanced resolution (600 dpi optical) in full 24-bit color, drawing originals ranging from index card to legal size paper from the 3015's auto-document feeder.
This model offers both USB 2.0 and parallel connectivity, features a powerful 240 MHz processor, and has 32 MB RAM. It's Energy Star certified and requires only a single, easy-to-replace print cartridge that yields an estimated 2,000 pages. The unit is backed by a one-year warranty.
What's in the Box HP LaserJet 3015 All-in-One, print/toner cartridge, power cord, Getting Started Guide, support flyer, device software and electronic User's Guide on CD-ROM, media input tray, automatic document feeder (ADF), fax guide, phone cord, ADF output support, output bin support, control panel cover; printer cable not included

30-sheet automatic document feeder
7 one-touch keys for easy and convenient faxing
Control panel features: fax controls, alphanumeric buttons, menu and cancel controls, copy controls, scan controls
150-sheet media input tray
Small footprint handles four functions and easily fits where you want it
Parallel IEEE 1284-B level 2 device with an IEEE 1284-B receptacle with the host computer set to ECP; USB: compatible with 2.0 specifications
Fast V.34 fax modem (up to 33.6 Kbps) + 2 RJ-11 ports

32 MB RAM handles complex jobs
2 MB fax memory for storing your important fax documents
Black and white printing, black and white copying, black and white faxing, black and white and color scanning
Faxing from ADF, auto redial, billing codes, fax forwarding, fax auto-reduction, block fax barrier, fax delayed sending, pollingreceive, distinctive ring detection
120-speed dials and 110 group dials for handy faxing


Buy Now

Click here for more information about HP LaserJet 3015 All-in-One

Read More...

8/09/2012

2.4GHz Bluetooth v2.0 USB Dongle Adapter EDR for Windows Vista/XP/2000 Review

2.4GHz Bluetooth v2.0 USB Dongle Adapter EDR for Windows Vista/XP/2000
Average Reviews:

(More customer reviews)
I purchased this item to transfer video and photos from my Nokia cell phone. I installed it on my XP desktop, using the included CD drivers for the install. No upgrades were needed and the device picked up the signal from the Nokia immediately. I uploaded my files easily and the signal was great within about a 5' range.
Note that when you are prompted for a 'key', it's any series of numbers you put in. Then simply put the same password into the other bluetooth enabled device and you'll be good to go.
Vista recognized this device immediately and had drivers for it. No need to use the driver CD to install.
I was going to pay HP extra to install a bluetooth option, but I would have overpaid. This is the cheapest, most effective option you can buy and the seller got it to me quick. Don't hesitate to buy it.

Click Here to see more reviews about: 2.4GHz Bluetooth v2.0 USB Dongle Adapter EDR for Windows Vista/XP/2000



Buy NowGet 76% OFF

Click here for more information about 2.4GHz Bluetooth v2.0 USB Dongle Adapter EDR for Windows Vista/XP/2000

Read More...